PCS140e.1

The PCS140e.1 is a simple pump control system with lead/lag sequencing on a timed rotation, “first on first off” basis, or manual rotation (user-selectable). Pumps are turned on or off as required to maintain a pressure set point within a user-configurable deadband. The PCS140e.1 can control from 2 to 4 pumps for on-off control (no [ . . . ]  Full Description »





LCS250e.1

The LCS250e.1 is a level-control system which uses 1 or 2 modulating valves to maintain water level in a two-tank system. Level control is provided for the DA tank while the surge tank receives feed control, with a bias to limit the valve position according to surge tank level. The system accepts a 4-20 ma [ . . . ]  Full Description »





LCS150e.1

The LCS150e.1 is a level-control system which uses 1 or 2 modulating valves to maintain water level in a single tank. The system accepts a 4-20 ma input for use as a level signal. Alarms denote High-High-, Low-, Low-Low-, and Low-water cut-off levels. Data is available via Modbus RTU communications or logged to an optional [ . . . ]  Full Description »





ADAC

The ADAC is a PLC-based deaerator/surge tank control system designed to monitor all points on a deaerator or surge tank and control the pumps in either on/off or variable speed drives. The ADAC can control multiple input valves, condensate return, freshwater makeup, emergency makeup, and more. Data is made available to communicate with most BAS [ . . . ]  Full Description »